KDP and IngramSpark check slightly different things. In short: KDP wants a clean PDF. IngramSpark wants a clean PDF that also follows a print standard, PDF/X-1a or PDF/X-3. PDF/A, the option you may have seen in Word’s PDF settings, is a different standard made for a different job.
What “print-ready” means, point by point
Taken from KDP’s paperback submission guidelines and IngramSpark’s File Creation Guide (both checked in October 2026).
- The exact page size, on every page. The PDF page is your trim size, for example 6 × 9 in. If anything prints to the edge of the page (bleed), each page is 0.125 in wider and 0.25 in taller: 6.125 × 9.25 in for a 6 × 9 book. Both platforms want bleed on the top, bottom and outside edges only. One page per PDF page, not two-page spreads.
- All fonts embedded. The fonts travel inside the PDF, so the printer never swaps in a font of its own. KDP asks for every font to show “Embedded” or “Embedded Subset” in the PDF, and its Word steps leave the “only the characters used” option off, which embeds the whole font. IngramSpark rejects files with fonts that aren’t embedded.
- Images at 300 DPI at the size they print. KDP asks for at least 300 DPI; IngramSpark recommends 300 ppi and grayscale images in a black-and-white interior.
- Transparency and layers flattened. KDP asks for this in so many words.
- Nothing extra. No crop or trim marks, comments, annotations or placeholder text. KDP’s list also includes bookmarks and metadata.
- Not locked. Password-protected or encrypted files are among the common upload failures KDP lists.
KDP also accepts a Word file for a book without bleed and makes the PDF itself. That works, but then KDP decides how your pages are converted. With your own PDF, you decide.
PDF/X vs PDF/A
Both are ISO standards: ordinary PDF plus a set of rules. They were made for different jobs.
| PDF/X | PDF/A | |
|---|---|---|
| Made for | Sending pages to a printing press | Keeping documents readable for decades |
| Fonts | Must be embedded | Must be embedded |
| Colour | Defined for print (PDF/X-1a: CMYK and grayscale only) | Screen colour is fine |
| Trim size | Each page records where it will be trimmed | No idea of trimming |
| Who asks for it | IngramSpark and commercial printers | Archives, courts, government records |
You’ll usually see three versions of PDF/X in export menus:
- PDF/X-1a: the strictest and most widely accepted. Colour must already be CMYK or grayscale, transparency must be flattened, every font embedded. IngramSpark lists the 2001 version.
- PDF/X-3: also allows colour-managed RGB images. IngramSpark accepts the 2002 version.
- PDF/X-4: keeps live transparency and layers. It isn’t on the list in IngramSpark’s current guide, so don’t choose it for IngramSpark.
If your program offers several years of the same version, pick the one IngramSpark names.
Where PDF/A comes in. Word’s PDF options include an “ISO 19005-1 compliant (PDF/A)” box. Ticking it forces the fonts into the file, which is good, but the result is an archiving file, not a print file. It doesn’t make the PDF PDF/X, and PDF/X is what IngramSpark checks.
What each platform asks for
| KDP paperback | IngramSpark | |
|---|---|---|
| File type | PDF (required for books with bleed); without bleed also DOC, DOCX, RTF, HTML or TXT | |
| PDF standard | None required. KDP’s Word guide suggests the PDF/X-1a preset when you print to the Adobe PDF printer, or “High-Quality Print” / “Press Quality” if it’s missing | PDF/X-1a:2001 or PDF/X-3:2002 |
| Fonts | All embedded; each font shows “Embedded” or “Embedded Subset” | All embedded; files with unembedded fonts are rejected |
| Images | At least 300 DPI | 300 ppi recommended; grayscale for black-and-white interiors |
| Bleed | Page 0.125 in wider and 0.25 in taller than the trim size | 0.125 in on the top, bottom and outside edges |
For colour pages and covers, IngramSpark also asks that total ink stay within 240%.
From Word: what you can and can’t do
In Word for Windows (Microsoft 365):
- File → Options → Save: tick Embed fonts in the file, and untick “Embed only the characters used in the document” and “Do not embed common system fonts”. These are KDP’s own steps.
- File → Options → Advanced, under Image Size and Quality: tick Do not compress images in file. Otherwise Word shrinks your images when it saves.
- Make sure the Word page size is already your trim size (or trim plus bleed), then File → Save As → PDF.
KDP’s guide goes one step further for people who have Adobe Acrobat: print to the Adobe PDF printer with the PDF/X-1a preset, which also keeps images at 300 PPI.
What Word can’t do is produce PDF/X on its own. For IngramSpark you need a program that exports PDF/X (Adobe InDesign, Affinity, Scribus, or Acrobat Pro converting an existing PDF), or a formatting tool that makes the PDF/X file for you.
How to check a PDF without Acrobat Pro
- Page size and fonts: open the PDF in the free Acrobat Reader and open Document Properties (File → Properties, or Ctrl+D; Cmd+D on a Mac). The Description tab shows the page size. The Fonts tab lists every font, and each one should say “Embedded” or “Embedded Subset”. (The newer Acrobat layout names some menus slightly differently.)
- KDP’s main interior file rules in one pass: check the finished PDF with the free KDP PDF checker. It runs in your browser (nothing is uploaded) and shows the page size, embedded fonts, margins and gutter page by page. It doesn’t check PDF/X.
- For KDP: upload the file and go through every page in the Print Previewer. It checks for errors you need to fix before you publish.
- PDF/X compliance needs a preflight tool, such as Acrobat Pro’s Preflight or callas pdfToolbox. Both are paid and both have free trials. IngramSpark also reviews files after upload and asks for a corrected file when one fails.
For everything else to check before you upload, see the KDP paperback formatting checklist and The 3 classic KDP rejections.
How BoundReady handles this
BoundReady makes the KDP and IngramSpark files for you from a Word manuscript. In our October 2026 tests on public-domain books, the IngramSpark interior and cover passed the PDF/X-1a check in callas pdfToolbox, and a 346-page 6 × 9 book passed KDP’s Print Previewer with no issues. The platforms make the final call on every title. We’re building it now: join the waitlist.
Platform requirements from KDP Help (“Paperback Submission Guidelines”, “Convert a Paperback Word File to PDF”, “Paperback Fonts”) and the IngramSpark File Creation Guide (version 8.24.26), checked 28 Oct 2026. Word steps are for Word for Windows (Microsoft 365); on a Mac and in older versions the menus are named slightly differently.